|
Health & Safety > Fibrol
W10
SAFETY DATA SHEET
1. IDENTIFICATION OF SUBSTANCE/PREPARATION & COMPANY
| PRODUCT NAME |
FIBROL W10 |
| CHEMICAL FAMILY |
Di fatty ester quaternary in
water. |
| COMPANY NAME |
COLE & WILSON LTD, NABBS LANE,
SLAITHWAITE, HUDDERSFIELD, W. YORKSHIRE, HD7 5AT |
| EMERGENCY TELEPHONE |
01484 842353 |
2. COMPOSITION/INFORMATION ON INGREDIENTS
| CHEMICAL CHARACTERISATION |
A9% di fatty ester
of n-methyl-triethanolammonium methyl sulphate.
1% isopropanol and 90% water.
Active ingredient: 93 334-15-7. |
3. HAZARD IDENTIFICATION
| RISK PHRASES |
None required |
| SAFETY PHRASES |
None required |
4. FIRST AID MEASURES
| INHALATION |
Provide fresh air,
monitor breathing, give oxygen if necessary. |
| SKIN CONTACT |
Wash off with plenty of soap
and water. Seek medical advice if necessary. |
| EYE CONTACT |
Rinse with plenty of water.
Seek medical advice if necessary. |
| INGESTION |
Seek medical advice. |
5. FIRE FIGHTING MEASURES
| EXTINGUISHING MEDIA |
Water spray, foam,
Co², dry powder. |
| SPECIAL PRECAUTIONS |
None |
6. ACCIDENTAL RELEASE MEASURES
| METHODS FOR CLEANING
UP |
Take up mechanically
or by use of absorbent material. Remove sources of ignition. Small
amounts may be rinsed away with soap and water. |
| ENVIRONMENTAL PRECAUTIONS |
In cases of judicious uses this
product does not cause disturbances in water purification plants,
according to information received so far. |
7. HANDLING & STORAGE
| |
Store in a well
ventilated room away from extreme temperatures. The use of safety
goggles and gloves is advisable. Avoid storing with oxidising agents.
|
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
| PERSONAL PROTECTION |
Wear eye protection.
Wear goggles and protective overalls. |
9. PHYSICAL & CHEMICAL PROPERTIES
| APPEARANCE |
Stable milky emulsion |
| COLOUR |
White |
| ODOUR |
Characteristic |
| CHANGES IN PHYSICAL STATE |
<0°C >100°C |
| FLASH POINT |
>61°C |
| DENSITY |
1.00 - 1.01 @ 15°C |
| SOLUBILITY |
Emulsifiable in water |
| pH VALUE |
3/5 |
| VISCOSITY |
Approximately 60cps @ 15°C |
| IGNITION TEMPERATURE |
>150°C |
| EXPLOSION LIMITS |
Lower 2% volume Higher 12% volume
(isopropanol) |
| VAPOUR PRESSURE |
Not determined |
10. STABILITY & REACTIVITY
| THERMAL DECOMPOSITION |
>150°C |
| HAZARDOUS REACTIONS |
None provided good industrial
practices followed |
| HAZARDOUS DECOMPOSITION PRODUCTS
|
Oxides of carbon, nitrogen and
sulphur |
11. TOXICOLOGICAL INFORMATION
| ACUTE TOXICITY |
LD50>5g/kg (rats
oral) on 100% activity |
| DERMAL COMPATIBILITY |
The 100% active product is irritating
to skin and eyes |
12. ECOLOGICAL INFORMATION
| ECOTOXICITY |
Biodegradability
measured by coupled unit test >90%
Fish toxicity LCO> 45000mg/L (brachydanio rerid 24 hrs). |
| Other ecological information. |
- |
13. DISPOSAL CONSIDERATIONS
| ADVICE ON DISPOSAL |
Remove the product
mechanically or with an absorbent. Burn in an incinerator that has
been approved by the government. |
14. TRANSPORT INFORMATION
| UNITED NATIONS NUMBER |
Not assigned |
| PACKAGING GROUP |
Non hazardous |
| IMDG PAGE NO. |
Non hazardous |
| MARINE POLLUTANT |
No |
| TREM CARD NUMBER |
None |
| FURTHER INFORMATION |
- |
15. REGULATORY INFORMATION
| RISK PHRASES |
None required |
| SAFETY PHRASES |
None required |
| WATER HAZARD CLASS (WGK) |
1 self classification. |
16. OTHER INFORMATION
| Date of Issue
|
10th January 1995 |
This information is based on our present state of knowledge
and is intended to describe our products from the point of view of the
safety requirements. It should not be construed as guaranteeing specific
properties.
M.P.SULLIVAN, CHEMIST
REVISION DATE 23rd November 1995. M.P.SULLIVAN, CHEMIST.
Health & Safety > Fibrol
W10
|
